1 / 6
TP-Link Tapo C200/C210 camera holder for QIDI X-MAX/X-PLUS/X-CF/I-MATES/I-FAST
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a Tp-link Tapo C200/C210 camera holder for all Qidi printers. I own a Qidi X-Max but you can install it on every Qidi printer. This camera has a pan/tilt movement, so you can easily check both print and filament status.
You need few strips of double sided tape and two 10mm M3 wooden screws.
I made 4 screw holes because you can choose whether to keep the power cable of the camera behind or on the sides. There are two guidelines that indicate the final orientation based on the chosen holes.
Mine was printed in PETG, 0.6mm nozzle and 0.3mm layer height. No supports needed.