T-Post Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A cover for an exposed T-post. This helps to mitigate getting impaled or injured by falling on it.
- Ocena
- 5 / 5
- Polubienia
- 47
- Pobrania
- 223
- Wydruki
- 1
- Wyświetlenia
- 1193
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a cover for an exposed T-Post. This helps to mitigate getting impaled or injured by falling on it. T-Posts are a general tool to help create fencing for livestock, support grape trellises, general farm and garden stuff, etc… They can pose a hazard during farming if one falls on one, a serious injury can occur. During installation the top of the T-Post often gets deformed by pounding the T-Post into the ground thus any solution has to adapt to this variable. This cover fits regular(1.25lb/ft) and heavy duty(1.33lbs/per) US T-posts. These typically sale in the store for around $1-$1.50 US dollars each. These were made for around $0.40 US dollars each.
The material for the T-Post Cover is Prusament Orange PETG printed at:
- 0.3mm layer height
- 30% infill
- 2 Shells thick
- Gyroid infill
Example: Malformed T-Post top.
Covered!
Example: Portion of the top has fractured leaving an irregular shape.
Covered!
T-post fence line covered!
No more worry about impaling myself or others :)
Future Versions:
- Nothing to change right now. I am going to test them through the winter and revise them as needed. Unless anybody has any suggestions and/or feedback for changes.