Prusa i3 MK3S Print Fan Shroud (sized for DIN557 square nut)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
M3 DIN562 square nuts are difficult to find in North America from retailers like Amazon, but M3 square nuts meeting…
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 365
- Wydruki
- 0
- Wyświetlenia
- 4597
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v2.0
M3 DIN562 square nuts are difficult to find in North America from retailers like Amazon, but M3 square nuts meeting DIN557 specifications are very easy to come by.
Because of this, I slightly modified the original Prusa i3 MK3S print fan shroud to have a larger slot for the thicker square nut.
I have tried to size the opening for the nut to be a nice tight friction fit so the nut doesn't fall out during assembly.
Source files remixed directly from Prusa3D's GitHub:
https://github.com/prusa3d/Original-Prusa-i3/tree/MK3S
Print instructions
Print with ABS if possible, PETG is a suitable substitute but will warp over time.
0.2mm layer height
20% Grid infill
No supports required*
*Supports are built into the original model, and must be removed before installation on your printer.