Simple swatch ASA-PETG-PLA
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My personal swatch, simpler than most because I also print Benchy.
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 68
- Wydruki
- 1
- Wyświetlenia
- 365
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Public Domain
Swatch
These are useful to experience the properties of different materials, and also to see the color of finished prints.
Simple
I only put some simple tests in here:
- very thin 20x20mm sheets (0.15, 0.30, 0.45 and 0.60)
- some engraving of (material) letters
- a humble bridging test (look at the bottom)
- a Lego plate 2x4
Print Settings
I like to play with the layer height of the first layer. This defaults to 0.20 I think, but I sometimes put this to 0.15. This setting will influence this swatch.
Lego
A 2x4 Lego compatible plate is inserted for easy storage using any creative Lego construction.
ASA-PETG-PLA
I may expand this with more materials and improved gcode and nozzle support later.
Friends
This swatch is friends with my Lego-compatible 3D Benchy.