Curtain hook
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Curtain hook with a lock that can be used as a replacement for hooks from the discontinued IKEA Kvartal curtain…
- Ocena
- 5 / 5
- Polubienia
- 32
- Pobrania
- 294
- Wydruki
- 2
- Wyświetlenia
- 1466
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Curtain hook with a lock that can be used as a replacement for hooks from the discontinued IKEA Kvartal curtain system, as it fits into the Kvartal gliders.
As the original hooks I used had seemingly quite low UV resistance, most of them broke at one single spot after few years of usage (see on the pictures). Unfortunately, by that time, there were no replacements on the market, so as usually, 3D printer came to the rescue...
Print instructions
Both 3mf for a 12pcs batch and stl for a single hook is attached.
As the hook is quite small, I recommend printing with detailed settings. I had good results with 0.4 mm extruder and 0.1mm layers.
UV-resistant filaments such as PET-G are recommended.