Nozzle Holder in an Altoids Tin, with Tool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This remixes the original nozzle holder in an Altoids tin (as supplied by E3D when you buy their Pro or Fun packs).
- Ocena
- 4,75 / 5
- Polubienia
- 41
- Pobrania
- 209
- Wydruki
- 1
- Wyświetlenia
- 1241
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
This remixes the original nozzle holder in an Altoids tin (as supplied by E3D when you buy their Pro or Fun packs).
This is 2.4mm shorter than the original, as I found that I could not close the tin, and the nozzles would dent the top of the tin when printed at the original height.
Additionally, I have added a 45° angled slot for putting the wrench tool that comes with said packs into the tin too.
I have made two versions, one that includes all sizes (I also made the .15 box code a little easier to read/print), and a version that only has the most common sizes used (0.25, 0.4, 0.6 and 0.8).
I am using the 'all sizes' version for my brass nozzles, and the 'common sizes' version for my non-brass nozzles.