1 / 22
Vacuum hose Y connector - splitter for all common sizes — zdjęcie 1
1 / 22

Vacuum hose Y connector - splitter for all common sizes

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Hose Y connect for all common sizes 1, 1.25, 1+3/8, 1+7/16, 1.5, 1+7/8,2, 2.5, 3, 3.5, 4, 4.5, 32,35, 38, 40, 50 60, 100

Ocena
5 / 5
Polubienia
303
Pobrania
2287
Wydruki
11
Wyświetlenia
6830
Oceny
8

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial

Hose splitters for all common (at least what I could find online) hose sizes.

Designed to need minimal support. When printing suggest you stand it on the single end. If needed add support in the center of the split.

All adapters have:

  • Sizes are for the inside of the hose (outside of the adapter)
  • 30deg and 45deg bend on the split end. 
  • The single end is always larger or equal to the double end.
  • 40mm long connector at each end
  • 3mm taper on each connector, from -1.5 to +1.5
  • Wall thickness of 2mm

Also generated are:

This one was pretty tricky to get right. Keeping the adapter size not to large, while make it work for all angles and sizes. Hope someone else finds it helpful.

If any of these don't suit you you can use the Parametric model to customise your own, or let me know and I can generate it.

Tagi