Vacuum hose Y connector - splitter for all common sizes
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hose Y connect for all common sizes 1, 1.25, 1+3/8, 1+7/16, 1.5, 1+7/8,2, 2.5, 3, 3.5, 4, 4.5, 32,35, 38, 40, 50 60, 100
- Rating
- 5 / 5
- Likes
- 303
- Downloads
- 2,296
- Makes
- 11
- Views
- 6,858
- Reviews
- 8
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Hose splitters for all common (at least what I could find online) hose sizes.
Designed to need minimal support. When printing suggest you stand it on the single end. If needed add support in the center of the split.
All adapters have:
- Sizes are for the inside of the hose (outside of the adapter)
- 30deg and 45deg bend on the split end.
- The single end is always larger or equal to the double end.
- 40mm long connector at each end
- 3mm taper on each connector, from -1.5 to +1.5
- Wall thickness of 2mm
Also generated are:
- Straight hose adapters
- 30° elbow hose adapters
- 30° tapered elbow hose adapters
- 45° elbow hose adapters
- 45° tapered elbow hose adapters
- 90° elbow hose adapters
- 90° tapered elbow hose adapters
- 100mm magnetic hose connectors
- 50mm magnetic hose connectors
This one was pretty tricky to get right. Keeping the adapter size not to large, while make it work for all angles and sizes. Hope someone else finds it helpful.
If any of these don't suit you you can use the Parametric model to customise your own, or let me know and I can generate it.