1 / 6
Bambu Lab Spool Adapter for Overture Cardboard Spools
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter ring for Overture cardboard spools to work on Bambu Lab reusable spools.
- Ocena
- 4 / 5
- Polubienia
- 124
- Pobrania
- 751
- Wydruki
- 4
- Wyświetlenia
- 8032
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 4) (Komentarze: 14)Remiksy (2)Kolekcje (271)Powiązane
UPDATE: 2023-01-17
I got tired of gluing in the adapter rings. I added flutes on the sides to ensure a tight grip. If it is too tight, you can scale the model down in your slicer. I also added a Core version that is the full with of the spool, so you will only need one piece.
Adapter Ring
Each spool requires two adapter rings.
- Remove one cardboard sides off of the original spool.
- Place the spool on a sturdy surface with the open side facing up.
- Insert the adapter into the center of the spool. Make the edge of the adapter flush with the edge of the cardboard core. The adapter has a slot to line up with the notch on the Bambu reusable spools. Make sure slotted side of the adapter is facing out
- Separate the Bambu reusable spool into two parts.
- Insert the Bambu spool section with notch onto the spool core so that the notch lines up with the slot on the adapter.
- Holding the spool together firmly, flip over the spool so that the remaining cardboard side faces up.
- Remove the remaining cardboard sides off of the spool.
- Insert the adapter into the center of the spool. Make the edge of the adapter flush with the edge of the cardboard core.
- Insert the remaining Bambu spool section onto the spool core.
- Rotate the Bambu reusable spool sections until the two sections “click” together.
Adapter Core
Each spool requires one core adapter.
- Remove one cardboard sides off of the original spool.
- Place the spool on a sturdy surface with the open side facing up.
- Insert the adapter into the center of the spool. Make the edge of the adapter flush with the edge of the cardboard core. The adapter has a slot to line up with the notch on the Bambu reusable spools. Make sure slotted side of the adapter is facing out
- Separate the Bambu reusable spool into two parts.
- Insert the Bambu spool section with notch onto the spool core so that the notch lines up with the slot on the adapter.
- Holding the spool together firmly, flip over the spool so that the remaining cardboard side faces up.
- Remove the remaining cardboard sides off of the spool.
- Insert the remaining Bambu spool section onto the spool core.
- Rotate the Bambu reusable spool sections until the two sections “click” together.
Remix of Dustin Tebo's Protopasta Bambu Lab spool adapter.