1 / 9
Bin subdividers for "IRIS USA Parts and Hardware Cabinet" — zdjęcie 1
1 / 9

Bin subdividers for "IRIS USA Parts and Hardware Cabinet"

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Bin subdividers for "IRIS USA Parts and Hardware Cabinet"

Ocena
5 / 5
Polubienia
33
Pobrania
128
Wydruki
2
Wyświetlenia
971
Oceny
5

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Helps to use the space in these bins a bit more effectively with smaller parts. 

 

  • 1, 2, 3, 4, 6, and 8-way bins, some can be mix and matched and used in one bin.
     
  • Numbering marks in the bins are only to help with the order that these should be placed in. The bins actually have slightly varying size from front to back, putting them in out of order may work to some extent but will have weird sizing issues.
     
  • Fitment was tested with ABS, so please test prior to printing a lot in other materials. But scaling should not need to be more than about 0.4% (ie 99.6% for PLA should do the trick instead of 100%).
     


Link to the product this is for:
https://www.amazon.com/gp/product/B07DFBSG4H

Tagi