Miniature painting holder with exchangeable screw-on top
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of Gaba Ghoul's painting holder with a printable screw-on top, so you can easily exchange several miniatures.
- Ocena
- 5 / 5
- Polubienia
- 37
- Pobrania
- 276
- Wydruki
- 5
- Wyświetlenia
- 1284
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of Gaba Ghoul's great painting holder, but with printable screw-on-top exchangeable bases, so you can switch between several minis without ever touching them.
Sources
This was inspired by https://www.printables.com/model/264538-miniature-painting-holder-remix (which uses PET bottle caps, if you have them) and made directly in Prusa Slicer by taking the original holder from https://www.printables.com/model/145997-miniature-painting-holder and combining it with the winding part of the middle piece from https://www.printables.com/model/75136-modular-screw-cap-storage (suitably scaled), and using its “top piece” as the exchangeable model base. I've included the 3mf file, so you can scale and modify as you want.
Printing
I've printed this in boring white (so no colour distracts the painting process) PLA+ with a 0.4 mm nozzle and 0.2 mm layer height. You might be able to get away with using a larger nozzle and layer height, but I recommend you check the fit of the screw part first on a smaller test print.
Lowering the center of gravity
I've set the infill to 10% for the upper part of the holder (and the screw), but 25% for the lower 2 cm of the holder - to lower its centre of gravity a bit (this is already configured in the attached 3mf file).
Alternatively (and maybe better), you could also leave a hollow in the lower part of the holder, pause the print at that height, put in some heavy object (or sand), then continue the print.