Kroonsteen (Luster / Screw terminal) Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed an easy way to cover up screw terminals I used to mount sealing lighting.
- Ocena
- 5 / 5
- Polubienia
- 29
- Pobrania
- 208
- Wydruki
- 1
- Wyświetlenia
- 1067
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed an easy way to cover up screw terminals I used to mount sealing lighting. So I designed these to fit different sizes of what we call in the Netherlands "Kroonsteentjes" what is "Luster screws" in English as far I can find.
They can be a bit tight to pushe the cable in, but this is intentional as I wanted a bit of stress/pull relieve on the actual screw terminal itself. If your terminal doesn't fit you can just break away to two pins in the middle.
Hope this helpes others!
Disclaimer : This file and/or any information around it is shared as is and can be used at your own risk. As it is related to electronics the user should understand and be aware of potential hazards and know what he or she is doing.
Print instructions
Print with non conducting materials (No metal or carbon filled materials.).
I also advice to use stable materials such as PETG or ABS instead of PLA so it has less chance to come lose over time when exposed to light or moisture.