20x20mm V-Slot extrusion adapters for Parallax Arlo Robot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a set of adapters for the Parallax Arlo Robot that allow 20mm V-Slot extrusion to be mounted vertically…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 251
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a set of adapters for the Parallax Arlo Robot that allow 20mm V-Slot extrusion to be mounted vertically through the 35mm (approximately) holes in the Arlo Robot's plates.
Adapter mounting holes are sized for M5 machine screws.
Attribution: The short GoPro knobs shown in the second photograph are these: https://www.thingiverse.com/thing:252554
The file "Arlo35mmhole20x20mntVdrill_template.stl" is a thinner version of the adapters that may be useful for performing quick test-fits and marking the holes to be drilled in the Arlo plates,
UPDATE 190420: Added adapter with four cable pass-through semi-circles.
UPDATE 190705: Added adapter with single tab for securing extrusion and three cable pass-throughs.
Print Settings
Printer Brand:
Prusa
Printer:
Rafts:
No
Supports:
No
Resolution:
0.2 mm
Infill:
20%
Filament: Inland PETG
Category: Robotics