20x20mm V-Slot extrusion adapters for Parallax Arlo Robot
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a set of adapters for the Parallax Arlo Robot that allow 20mm V-Slot extrusion to be mounted vertically…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 9
- Makes
- 0
- Views
- 251
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a set of adapters for the Parallax Arlo Robot that allow 20mm V-Slot extrusion to be mounted vertically through the 35mm (approximately) holes in the Arlo Robot's plates.
Adapter mounting holes are sized for M5 machine screws.
Attribution: The short GoPro knobs shown in the second photograph are these: https://www.thingiverse.com/thing:252554
The file "Arlo35mmhole20x20mntVdrill_template.stl" is a thinner version of the adapters that may be useful for performing quick test-fits and marking the holes to be drilled in the Arlo plates,
UPDATE 190420: Added adapter with four cable pass-through semi-circles.
UPDATE 190705: Added adapter with single tab for securing extrusion and three cable pass-throughs.
Print Settings
Printer Brand:
Prusa
Printer:
Rafts:
No
Supports:
No
Resolution:
0.2 mm
Infill:
20%
Filament: Inland PETG
Category: Robotics