1 / 1
Meanwell LRS-350-24 90mm Fan shroud upgrade — zdjęcie 1

Meanwell LRS-350-24 90mm Fan shroud upgrade

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement faceplate to mount a 90mm PC case fan. Original fan was very loud.

Ocena
5 / 5
Polubienia
8
Pobrania
47
Wydruki
2
Wyświetlenia
687
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Public Domain

The original PSU that came with my Prusa died prematurely. I did not want to get the replacement PSU through Prusa [due to international shipping]. I opted for a Meanwell LRS350. But as luck would have it, my Meanwell PSU came with a screeching fan.

This top plate is for replacing the stock fan with a 90mm case fan. Please remember to hold on to the screws that comes with the PSU. They self thread into the printed sides.

The fan will have to be soldered/spliced to the connector that comes with the PSU fan. Or if you have blanks you can pin it yourself.

The fan guard I've included here is a blank. Please remember to set your slicer to "0" for top and bottom fill layers and go nuts with the infill pattern to get the grill design of your dreams. I went for a honeycomb with 20% infill.

Tagi