1 / 1
Meanwell LRS-350-24 90mm Fan shroud upgrade — image 1

Meanwell LRS-350-24 90mm Fan shroud upgrade

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Replacement faceplate to mount a 90mm PC case fan. Original fan was very loud.

Rating
5 / 5
Likes
8
Downloads
47
Makes
2
Views
687
Reviews
2

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Public Domain

The original PSU that came with my Prusa died prematurely. I did not want to get the replacement PSU through Prusa [due to international shipping]. I opted for a Meanwell LRS350. But as luck would have it, my Meanwell PSU came with a screeching fan.

This top plate is for replacing the stock fan with a 90mm case fan. Please remember to hold on to the screws that comes with the PSU. They self thread into the printed sides.

The fan will have to be soldered/spliced to the connector that comes with the PSU fan. Or if you have blanks you can pin it yourself.

The fan guard I've included here is a blank. Please remember to set your slicer to "0" for top and bottom fill layers and go nuts with the infill pattern to get the grill design of your dreams. I went for a honeycomb with 20% infill.

Tags