V-Core3 belts hotswap corners
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
V-Core3 & 3.1 rear corners replacement. It removes motor cage to make belts swap fast and easy.
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 568
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A simple and affordable replacement of the stock RatRig V-Core3/3.1 motor cages that allows fast and easy belt replacement, without the need to unmount the entire motor assembly and (if legacy enclosed) the lid and other frame components.
The groove inside the model allow routing and hiding wires (e. led lights, endstops, webcams) into the frame if printer has legacy enclosure.
- BOM: RatRig stock spacers, bolts and nuts;
- Material: PETG (ABS/ASA suggested);
- Supports: No;
- Printing instructions: model has sacrifical layers - slice it upside-down.
If you like my design and you are happy with it, please consider donating a coffee to justify the time and effort in researching/designing.
Enjoy it!