V-Core3 stepper decoupling/belt hotswap corners
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
V-Core3 & 3.1 rear corners replacement - allows fast belts swap, to be used with stepper motor dampers/decouplers.
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 790
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
A simple and affordable replacement of the stock RatRig V-Core3/3.1 motor cages that allows fast and easy belt replacement, without the need to unmount the entire motor assembly and (if legacy enclosed) the lid and other frame components.
This design has to be used in conjunction with stepper motor decouplers like this: https://www.printables.com/it/model/326259-stepper-drive-decoupler
The groove inside the model allow routing and hiding wires (e. led lights, endstops, webcams) into the frame if printer has legacy enclosure.
- BOM: n.2 F695ZZ 5mmx13mmx4mm ball bearing - RatRig stock bolts, spacers and nuts;
- Material: PETG (ABS/ASA suggested);
- Supports: No;
- Printing instructions: model has sacrificial layers - slice it upside-down.
If you like my design and you are happy with it, please consider donating a coffee to justify the time and effort in researching/designing.
Enjoy it!