NeverMore Magnetic Power Supply
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For quick disconnect the power supply
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 1900
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Since I can't mount my Nevermore directly to the printer, but still wanted to control it via the KlipperExpander.
I built a small magnetic connector for the Nevermore air filter.
So you can get the printer out of the housing without a difficult plug connection and leave the Nevermore in the chamber.
See a little video here:
https://youtube.com/shorts/iZVz8JE5IGA?feature=share
Both parts are printable without supports.
The nevermore part will be glued to the nevermore housing.
On the cable part i fixed the cable with black hot glue.
With the magnets, please make sure that you use different polarities for + and -, so that the poles cannot be mixed up.