Pacing horse
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I found this horse on myminifactory and tried to print it. Worked out pretty well. I did not use infill so i had to…
- Ocena
- 4,875 / 5
- Polubienia
- 133
- Pobrania
- 1557
- Wydruki
- 7
- Wyświetlenia
- 5511
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Architecture & Urbanism
- Licencja
- Creative Commons — Attribution
I found this horse on myminifactory and tried to print it.
Worked out pretty well.
I did not use infill so i had to fuse some parts afterwards. The top of the back seperated due to shrinking. I heated up the part and gently forced them together. Also the front leg which is of the ground broke from its supports. i had to use my hand 3D printerpen to fuse it.
I used custom supports in Cura an also minimal boomsupport.
https://www.myminifactory.com/object/3d-print-pacing-horse-103084
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
Yes
Resolution:
0.28
Infill:
none
Filament: Reprapper PLA White
Notes:
I found this horse on myminifactory and tried to print it.
Worked out pretty well.
I did not use infill so i had to fuse some parts afterwards. The top of the back seperated due to shrinking. I heated up the part and gently forced them together. Also the front leg which is of the ground broke from its supports. i had to use my hand 3D printerpen to fuse it.
I used custom supports in Cura an also minimal boomsupport.
EDIT:
I made a new baseplate and removed the one on the horse. Now its easier to make some custom supports to hold the legs. Also i reduced the number of polygones to make the file a lot smaller but keep the details.
Category: Scans & Replicas