Pacing horse
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I found this horse on myminifactory and tried to print it. Worked out pretty well. I did not use infill so i had to…
- Rating
- 4.875 / 5
- Likes
- 133
- Downloads
- 1,557
- Makes
- 7
- Views
- 5,511
- Reviews
- 8
Updated at source:
Model information
- Source
- Printables
- Category
- Architecture & Urbanism
- License
- Creative Commons — Attribution
I found this horse on myminifactory and tried to print it.
Worked out pretty well.
I did not use infill so i had to fuse some parts afterwards. The top of the back seperated due to shrinking. I heated up the part and gently forced them together. Also the front leg which is of the ground broke from its supports. i had to use my hand 3D printerpen to fuse it.
I used custom supports in Cura an also minimal boomsupport.
https://www.myminifactory.com/object/3d-print-pacing-horse-103084
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
Yes
Resolution:
0.28
Infill:
none
Filament: Reprapper PLA White
Notes:
I found this horse on myminifactory and tried to print it.
Worked out pretty well.
I did not use infill so i had to fuse some parts afterwards. The top of the back seperated due to shrinking. I heated up the part and gently forced them together. Also the front leg which is of the ground broke from its supports. i had to use my hand 3D printerpen to fuse it.
I used custom supports in Cura an also minimal boomsupport.
EDIT:
I made a new baseplate and removed the one on the horse. Now its easier to make some custom supports to hold the legs. Also i reduced the number of polygones to make the file a lot smaller but keep the details.
Category: Scans & Replicas