1 / 3
54 mm (2 1/8") hole saw desk cable Grommet
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed this to pass cables through the top of my desk. I printed it with a .6 nozzle at a .3 layer height.
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 212
- Wydruki
- 1
- Wyświetlenia
- 1275
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 4)Remiksy (0)Kolekcje (37)Powiązane
I designed this to pass cables through the top of my desk. I printed it with a .6 nozzle at a .3 layer height. This should be a friction fit, if it is too loose I added a small amount of electrical tape to increase the diameter.