LEGO SPIRAL SPINNING SPINNER WIND TURBINE WAVE
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
COMPATIBLE WITH LEGO AXIS
- Ocena
- 5 / 5
- Polubienia
- 26
- Pobrania
- 240
- Wydruki
- 1
- Wyświetlenia
- 1484
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Made this as a lego compatible version similar as original spinner that was intended for my filament spool holder.
PRINT WITH SHARP EDGES POINTING DOWNWARDS, on some slicer software model needs to be rotated 180° so the fillets turn up nice
It is 200mm in diameter in native format, it has a small twist so it may be wind operated, just print two mirror parts for wave effect while spinning in opposite direction
Hole should be 4.8 and technic + axle, mind the tolerances when printing or redo printed holes with a drill or broach
SHARE LIKE COMMENT TIP - POST A MAKE
My other designs
https://www.thingiverse.com/thesloppyapprentice/designs
https://www.printables.com/social/296116-the-sloppy-apprentice/models
Take a look at my youtube channel: