1 / 5
Dental Night Guard Case
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here is my design for a Dental Night Guard Case.
- Ocena
- 4,545 / 5
- Polubienia
- 109
- Pobrania
- 784
- Wydruki
- 10
- Wyświetlenia
- 3182
- Oceny
- 11
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 10) (Komentarze: 16)Remiksy (1)Kolekcje (170)Powiązane
Here is my design for a Dental Night Guard Case. It consists of two parts that you can print together or separately, if you wish a two-color appearance. To connect the two halves, simply insert 1.75mm Filament into the Hinge mechanism. You might need to clean up the hole a bit to make it fit. Works perfectly for me.
Print instructions
I used 0.2mm layer height and pretty basic PLA print settings. Around the hinge I used the functionality of PrusaSlic3r to reduce layer height to 0.05 to make them smoother.