Liczymy pasujące modele…
After both parts have been printed, a 60mm*60mm piece is cut out of a foil. This foil goes between the top and bottom parts. The thicker the foil, the louder the horn. But be careful, the horn can be so loud that your ears hurt.
This is a quick and functional 3D reconstruction of the mouthpiece for the Katarek Travel nasal aspirator. I reverse-engineered the design by measuring the original mouthpiece and translating it into a 3D model using Fusion 360. The model…
Generated using VennCad, Model is oriented to allow for best performance. Use tree supports at 20 deg threshold angle, on build plate only and support crit regions only. Add a negative cylinder into the slicer to remove the text above the…
Generated using VennCad, Model is oriented to allow for best performance. Use tree supports (auto) at 20 deg threshold angle, on build plate only and support crit regions only. Add 3 negative cylinders into the slicer to remove the text…
A charming, dog-shaped shadow puppet designed for interactive storytelling and creative play. The puppet can bark and wag its tail, bringing your shadows to life with expressive movements. Control both actions effortlessly using your…
K-cup extractor with built in mason jar wide mouth lid. Prints without supports.
If you are printing with 0.4+ nozzle the Plymouth text might not be intact since it's so thin. I didn't want to make it bigger so that is why I also included keychain without text If you don't mind the text. The diameter is 53mm and it's…
1GB Plymouth Laser/ Eagle Talon/ Mitsubishi eclipse Side marker light clip MB596509. I recommend printing on resin printer. Might need some sanding. It is exact copy of original.
Here I have created a shisha mouthpiece stand in which you can place up to four mouthpieces.
This is a mouthpiece for a blowgun. It is designed for a 12mm pipe (inner diameter: 10mm) so I can shoot Bang Snaps with it. It should be printed with supports. Organic supports have worked very well for me.
This model is compatible with the lego system.
A trumpet mouthpiece with two holes so you can play two trumpets at the same time.
A lightweight velocity stack (bellmouth intake) for 40 mm fans. The smooth flare reduces turbulence and noise, giving quieter airflow and better efficiency. Designed to clear the dual 5015 part-cooling fans on the Hero Me Gen7 mount. The…
This should fit any standard canning jar. If printed well, and well tightened, these lids are almost water tight (actually, they form a tighter seal than the commercially sold counterparts linked above), but not air tight. These are…
better mouthpiece it is both parts of the mouth piece put in one model so you don't need glue
This is a compact, stable drying stand designed specifically for Nalgene bottles , compatible with both Narrow Mouth and Wide Mouth models. Designed to promote drying while keeping a minimal footprint on your counter. The stand features a…
As the title says, useful for keeping a waterpiece upright while changing the cap
The 1970 Plymouth Superbird was the most famous NASCAR in NASCAR history, breaking the 200 mph barrier with driver Richard Petty. This car is in the Cars Disney movie, featured as Strip "The King" Weathers, and was voiced by Richard Petty…
My grandson broke the whistle mouthpiece for his horn set. This set is a bunch of plastic pipes (i.d. of the mouthpiece is 32.5 mms.
A bold roaring bear mug design with an open-mouth expression and strong sculpted features. The shape is made to stand out as a dramatic “wild animal” cup and looks amazing in dark, metallic, or stone-style colours. Great for themed desks,…
I made this elevated drain to prevent any drops of mouthwash from reaching the toiletries shelf. Sized for a Listerine bottle.
An 11B4 Mouthpiece in two variants: beautiful (with decorations) and functional (simpler and thicker, more resistant). I recommend printing it backbore side down (cup side up) in order to obtain a smoother rim. This will make the print…
A striking and unconventional display piece, this open mouth bust captures intricate oral detail in a bold sculptural format. Featuring individually defined teeth, realistic gum contours, and a fully modelled interior, this piece stands…
Dimensions are simular to an JK Exclusive 1A printed it with PETG Got best results with adaptive Layer heights and printing it with the big site up (see pictures)
Designed this to replace my glass mouthpiece that keeps breaking from being dropped. Printed in PETG.
Flexible replacement mouth piece for Rubbermaid style drink boxes. Designed to mimic mouth feel and improve durability. Someone I knew had a client with a mental disability who refused to drink from anything other than a rubber maid drink…
This model is compatible with the lego system.
Plymouth Superbird Dodge Charger Daytona Wall Art
This model is compatible with the lego system.
This standalone Smallmouth Bass statue features a sturdy, well-proportioned body with textured scales and realistic fins. No base is included, making it perfect for desktop displays, hobby collections, or freshwater-themed decor. Prints…
quickly made to replace broken speaker grill. I haven't printed the model and can be that measurements are slightly off as the old one was glued back together. legs thought to be printed separately and can be glued with epoxy for example…
Here I have created a shisha mouthpiece stand in which you can place up to eight mouthpieces.
These are mouthpiece shapes with various beak thicknesses. For real saxophone mouthpieces, we have a parametric mouthpiece modeling engine at mouthpiecelabs.com . Visit the site the create yours! Testing instructions: pick Soprano, Alto,…
This model is compatible with the lego system.
Mason jar lid organizers Vertical mason jar lid organizer for plastic, reusable lids The model includes both regular and wide mouth organizers.
Naústek na vodní dýmku s motivem One Piece- Shisha mouthpiece
This is a monster that can be used to hold items in his mouth. He likes to dress up and currently he is dressed as the easter bunny. He has been printed on the H2S using 4 colours.
Don't Let Your Mouth Out Run Your Hands Category: Office
east to print mouth guard box - hinge needs 68mm of fillament inside to make the hinge actually work and be something. easy to assemble, durable and comfortable. actually kinda big and can fit every mouth guard. please share your result ;)
Balloon racer with simplified air ducts and axles + exhaust mouthpiece added for easy inflation with balloon attached.
A sturdy handle for regular (2.5") mouth jars. Options for fully open or with a straw hole. Fits standard Mason, Kerr, or Ball jars. Options for full length (148mm) or shorter (110mm) handle Open or enclosed/straw options Taller handle…
I always had a fascination with dragons. I used meshy to create the design by simply asking it to create an open mouth dragon bust. Printed on my Bambu A1. I used red (because I'm Welsh) but i would be interested to see what other colours…
Yamaha 4C mouthpiece cap, leather lig, vents Fits alto sax mouthpiece 4C with leather ligature. Ventilation holes. Material: PLA Nozzle: 0.4 mm AMS: not required. Supports: not required; gluing the base plate is recommended for extra…
Flip it around, and it will print with no supports. I was sucking up too many babies when doing water changes, and spending too much time rescuing them from the Bucket. Also I suspect its not very healthy for them to go through the tube…
Crate for stackable storage of half-pint wide-mouth jars from Ball and Kerr, and any similar sized jars. I took the source model and imported it into Blender, resized (some scaling, some selective stretching) for these jars, decreased the…
Printed in PLA at 0.12 layer, 6 walls 25% infill. I use a 2 layer raft for better adhesion, printed upside down, finished, polished with 600 then 1200 paper to ensure smooth radius edges.
Printed in plain PLA 0.12 layer, 6 walls 25% with a 2 layer raft and tree supports on build plate. I will work straight from printer, but it is worth finishing it off with fine paper to a smooth finish, and radius the edges.
I'm not 100% that this part will fit as my frame was bend back into shape after crash. Be carefull when installing it as clips are wery brittle. Send me feedback and i will fix the part. Use heat resistant filament.
update: I've made the license commercially available to you. I like to pay it forward as I have made my share of money off of free models. Anything that can potentially make someone's life or health better, I will release as commercially…
This one was made as a joke for friend. :-D Print Settings Supports: No Post-Printing intended use intended use You can use it like this but with printed mouth tip is more elegant You can use it like this but with printed mouth tip is…
Smoke the wisdom. Print Settings Rafts: Doesn't Matter Supports: Yes Post-Printing intended use intended use You can use it like this but with printed mouth tip is more elegant (you need one more part, for example,…
GoT Drogon head shisha mouth tip Print Settings Supports: Yes Resolution: 0.15mm Infill: 15% Post-Printing ============= You can use it like this but with printed mouth tip is more elegant (you need one more part, for example, this in…
GoT Night king shisha mouth tip Post-Printing intended use intended use You can use it like this but with printed mouth tip is more elegant (you need one more part, for example, this in fact it's just a piece of the classic hookah hose,…
Yoda head as shisha mouth tip Post-Printing intended use intended use You can use it like this but with printed mouth tip is more elegant (you need one more part, for example, this in fact it's just a piece of the classic hookah hose, so…
Joker shisha mouth tip Print Settings Supports: Yes Resolution: 0.15mm Infill: 15% Post-Printing intended use intended use intended use You can use it like this but with printed mouth tip is more elegant (you need one more part, for…
Custom mouthpiece source: https://cults3d.com/en/3d-model/game/custodes-helmet-bits-wardens-of-the-dark-cells
This is a mouthpiece cap for tenor sax. I am also working on alto sax, soprano sax, baritone sax, and Bb clarinet.
Given the sleek design of the Inderbinen tenor mouthpiece, it is hard to find ligatures that offer a tight fit. As a consequence, I designed a simple ligature that tightly hugs the mouthpiece (Inderbinen Rich) and my current favorite…
My son needed a way to transport his tennor sax mouth piece and neck strap to and from school (we have a sax both at home and at school) Printing Notes: Printed on an AnkerMake M5. Insert printed at full speed TPU. Did not come out smooth…
I made the vuvuzela as a training device for my tone on wind instruments. The parts for this build are the mouthpiece and HT-tube with a diameter of 40mm. The length of the tube should be between 1.20m-1.50m(you can connect shorter pieces…
Caja orientada para el bucal. Necesario: 3 tornillos - 30mm M.3 Espero que os guste mi primer diseño..
Still Learning Onshape. This is a model for a funnel that I needed to help fill my DIY chicken feeders. This is Version 1. I will update the file as I lock in a better design
Handy mouthpiece designed to fit glass connectors with a 3/8ths inch outer radius. Note: Common red brass nozzles contain up to 5% lead and some makers suggest not making products which come into contact with mucus membranes with brass…
A simple holder for your Mouthpiece (alt-saxophone). Prevents turning and damaging your mouthpiece in the case…
Measures: Mouth: 3.54"/90mm Stem: 1.57"/40mm Perfect for canning! Vented design for fast flow. Hang hole in handle.
This is a remix of the Arducam B0205 1080P Day & Night Vision USB Camera Case that has been customized for use with virtual reality headsets. For required hardware and specific printing instructions, observe the original posting of this…
Here's a standard 7C trumpet mouthpiece! It works pretty well. It's obvious when playing that it's not the same as a metal one, but it gets the job done. Print Settings Printer Brand: Creality Printer: CR-10 Rafts: Doesn't Matter…
Have you ever thought to yourself, "man, if only my mouthpiece was 11.8 inches longer I'd be such a better musician"? Well I'll be darned, you're just in luck! Measuring 380mm (15 in) just find yourself a nice big 3d printer and get…
I printed this with TPU, works very nice. The “new style” Cap fits in the Arizer Case https://www.printables.com/model/315914-arizer-air-max-case-v4
a wall mount for your mouthpieces. holds in place with 2 screws. it fits a maximum of 3 mouthpieces. i only tried it with trumpet mouthpieces but other like bugel or cornet should work fine
I previously made a mason jar bird feeder. But my wife found a bigger jar at the thrift store but it had a wide mouth. So I redesigned the feeder to work with wide mouth mason jars and made it all around bigger. To make sure it fits on…
This bass clarinet to bari sax adapter is just for fun. It works especially well when used with the Avatar Mojo Fave Bass Clarinet Mouthpiece (thingiverse thing:6576772). You will have intonation issues so don't use this to play music…
Hing is created by axis dia 1,4mm. Layer 0,16 or 0,12mm, nozzle 0,4mm In case you need I can modify size or add letters…
TRESPASUERS WILL BE HOGG TIED AND TOLD THEY HAVE A PURTY MOUTH SIGN Category: Signs & Logos
Uses regular candy corn for teeth. Make a bunch because everyone will want one. Uses 3mm fasteners. PLA
Mouthpiece for Bass and Contrabass Drone Flutes inspired by Miguel Medina. Distance between the bores = 46mm
Connect filter sock and position at the base of downspout to catch debris when clearing out gutters.
This is the mouth plate [spell], modelled for cosplay, that Beetlejuice casts on Barbara Maitland (played by Geena Davis) during the wedding scene in the first Beetlejuice movie from 1988 by Tim Burton. Put the mouth plate in hot water…
this was actually a redo and combination of a few models all of which were incomplete and/or broken. I've also added my spinner wheel design.
Snake Crawling out of Mouth of Skull. The back is flat. (add your own screw mount) Test #2 with new Displacement technique. Works pretty good. This took less than 30 minutes from start to finish to create. AI + Depthmap + Blender.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.1mm Swap Instructions: Start with Black At layer #7 (0.58mm) swap to Jade White for the rest.
Reusable hookah hygenic mouthpiece. Usable for mouthpieces form approx. 9 to14 mm bore diameter. Just break away the constructed support after printing. Print Settings Printer Brand: Prusa Printer: MMU2s Rafts: Doesn't Matter Supports: No…
Spare mouthpiece for Alcovisor Deimos breathalyzer. Design for my friend, who told me they are no longer selling the original ones. I am poor scientist, who likes to walk, so I have no idea. Print with PLA. If you can, use steel nozzle,…
A BEAR WITH A FISH IN ITS MOUTH!!! A version with the extra fins removed has been added.
Print with as much infill as you can, should snap right on without glue! One version includes a sweet note for HF!
If you appreciate my work, consider supporting me by buying me a cup of hot chocolate! :) https://buymeacoffee.com/aleksandrs In our simulation center, the Micro Medical MicroPeak Peak Flow Meter is a staple for practical classes, and…
I created this because there were no good examples online. Uses 10x3 rare earth magnets. Fits SISU mouth guards perfectly. I use this for Brazilian Jiu Jitsu practice and just clip it to my bag to hold. The file doesn't have my name or…
![Yamaha 4C [Alto] mouthpiece cap, leather ligature, ventilation](https://media.printables.com/media/prints/cd0cf4e7-e20b-4472-8ea1-b2287a3d1e4d/images/12704263_f02b94f0-fc8a-41ff-928e-24757c63a9f3_3947183e-1a2c-45e9-bc4d-c867e8472325/saxophone-mouthpiece-cover-size-03.jpg)
