1 / 10
The Prusa Mouth Organ - A printable harmonica w/ Carry Case — zdjęcie 1
1 / 10

The Prusa Mouth Organ - A printable harmonica w/ Carry Case

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Orientacyjna cena wydruku pliku

0,24 € – 0,29 € netto (bez VAT)

Dla pliku: reed_plate_0.2mm_PLA_MINI_20m.gcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 0,27 € netto (środek widełek).

Masa podana przez autora
2 g
Czas druku podany przez autora
19,8 min
Materiał u źródła
PLA
Materiał wyceny
PLA
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

(Probably) The world's first fully functional printable harmonica - tuned to A minor-ish!

Ocena
3,825 / 5
Polubienia
982
Pobrania
5164
Wydruki
42
Wyświetlenia
24 603
Oceny
40

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Music
Licencja
Creative Commons — Attribution

Overview

A fully printable, fully functional printable harmonica in a simple 3-piece form factor that clips together - no fasteners needed! The design features swappable reed plates which set the playable notes. The attached reed plate has been painstakingly tuned to an A-minor scale, starting at A4 through to A5. I'll be adding additional reed plates in future updates to offer more note groupings. Better yet, feel free to try out your own designs using this model as a template (step files attached).

The current version does not incorporate draw reeds yet, only blow reeds.

UPDATE - 28/MAY/2023: Now with a print-in-place carry case

Print Instructions

The reed plate is very sensitive to the material, the printer and the slicer settings - a decent first layer is crucial! The clearance between the reeds and the plate must be as small as possible for maximum sound efficiency without being too tight as to interfere with the motion of the reeds. The reeds must be completely free to vibrate up and down within their gaps without coming in contact with the plate. I'd recommend you print the reed plate solo to avoid other parts interfering with the reeds.

The comb and cover are less fussy and don't need as much care. Use your favourite filaments and settings as usual.

Here's my recommended setup:

  • Printer: Prusa mini+
  • Bed: PEI smooth spring steel sheet
  • Filament: 
    • Reed plate: Polymaker PolyTerra PLA in Charcoal Black
    • Cover: No preference
    • Comb: No preference
    • Case: No preference
  • Bottom layer count:
    • Reed plate: 1
    • Cover: No preference
    • Comb: No preference
    • Case: No preference
  • Top layer count:
    • Reed plate: 2
    • Cover: No preference
    • Comb: No preference
    • Case: No preference
  • Infill:
    • Reed plate: Gyroid, 15%
    • Cover: No preference
    • Comb: No preference
    • Case: No preference
  • Layer thickness:
    • Reed plate: 0.2mm
    • Cover: 0.2mm
    • Comb: 0.2mm
    • Case: 0.2mm
  • All other settings: Prusa Slicer 0.2mm quality profile defaults

 

Print Orientations

Reed plate
Comb
Cover
Case

Assembly Instructions

See the attached video for a good visual on assembly.

1- Attach the reed plate to the comb by sliding the reed plate under the rear lip of the comb and pressing down on the slotted holes until the plate is completely flush with the top surface of the comb. This joint should be as airtight as possible for max volume.

2- Ensure the clips on either side of the comb are free to spring backwards. They may need be loosened up after printing.

3- Push the reed plate and comb assembly into the cover until the clips click into plate.

4- Play some sweet tunes!

 

Customisation

Use Prusa Slicer's new text feature to add your own text to the comb! Import the attached “comb_blank.stl” into Prusa Slicer and add your text to the blank back face of the comb.

 

Alternatively, use your favourite CAD software to make the mouth organ your own!

UPDATE 28/MAY/20234: Carry Case

Simply print the form fitted print-in-place carry case, pop it off the build plate, loosen the hinge and use it to securely carry your mouth organ!

 

Happy printing!

Tagi