Laundry detergent scoop
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Accurately measure your laundry detergent used, break large pieces into smaller ones.
- Ocena
- 5 / 5
- Polubienia
- 62
- Pobrania
- 436
- Wydruki
- 4
- Wyświetlenia
- 1981
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I really hate doing the laundry! I never use the right amount of detergent, most of the time the detergent forms large lumps which are hard to scoop out, making a mess of the kitchen floor. Well, not any longer!
I have modeled this detergent scoop that allows me to measure out the correct amount of detergent, 115ml for a small wash or 175ml for a full wash. It comes with a sharp edge to scrape off clumped detergent. On the back of the handle, it has a set of sharp points that can hammer really clumped detergent into smaller pieces that can be easily scooped out.
Print settings
Used filament: I don't see any reason why PLA wouldn't work, but i printed mine in PETG.
Layer height: 0.2mm
Top bottom layers: 5
Infill: 15%
Supports: Advice to use them to support the top inside of the cup.
Brim: Depends on build plate, but to be safe just use a 5mm brim.
I still hate doing the laundry. But at least filling the washing machine with detergent is a little easier thanks to this laundry detergent scoop…