Laundry detergent scoop
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Accurately measure your laundry detergent used, break large pieces into smaller ones.
- Rating
- 5 / 5
- Likes
- 62
- Downloads
- 436
- Makes
- 4
- Views
- 1,981
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I really hate doing the laundry! I never use the right amount of detergent, most of the time the detergent forms large lumps which are hard to scoop out, making a mess of the kitchen floor. Well, not any longer!
I have modeled this detergent scoop that allows me to measure out the correct amount of detergent, 115ml for a small wash or 175ml for a full wash. It comes with a sharp edge to scrape off clumped detergent. On the back of the handle, it has a set of sharp points that can hammer really clumped detergent into smaller pieces that can be easily scooped out.
Print settings
Used filament: I don't see any reason why PLA wouldn't work, but i printed mine in PETG.
Layer height: 0.2mm
Top bottom layers: 5
Infill: 15%
Supports: Advice to use them to support the top inside of the cup.
Brim: Depends on build plate, but to be safe just use a 5mm brim.
I still hate doing the laundry. But at least filling the washing machine with detergent is a little easier thanks to this laundry detergent scoop…