Spice Rack for Ankerkraut Spicemixes (stackable) MM

It's a Remix of Frank Deschners Spice Rack.
The design was nice but i was missing something. So i decided to remix his design. Made it a littlebit smaller and stackable.

This Version is unlimited Stackable.
Limits only by physics.

And it got a fancy Logo ;)

Update:
Added a 2nd version of the board with a bigger Logo

Update 2:
The Multimaterial Version for the 3x Board with the logo is here.

Update 3:
Bigger is better! Now as 4 Bottles Version. You need to place the boards diagonal on the Bed (see Picture)

spicerack-4-w-logo.stl
The 4x Bottles version with the logo

spicerack-4-no-logo.stl
The 4x Bottles version without the logo

spicerack_logo_for_MM.stl:
Just the Logo-Letters. Print them in a different Color you want or paint them seperately and press them in the Board (See pictures if you don't get it) Print without Brim!

spicerack_bord_for_MM.stl:
The 3x Board with Logo for the loose printed letters

spicerack_board_with_bigger_logo.stl:
Thats the size from the logo of the 2-Board-Version on the picture.

spicerack_board_with_ankerkraut_logo.stl:
Thats the size from the logo of the 3-Board-Version on the picture.

If you want to stack more than three, please use proper wall fasteners and use more than just one Board to fasten the Rack.

To print a 3 Board Spicerack at once it took me 29 hours.

Video of first assembling:

Print instructions

It fits like a glove
If you deburr very well!

The arms and the plugs are just 0,1mm smaller then the hole. Deburr really very well!

Printed in PLA, 30% Infill, 0,4mm Nozzle, 0,2mm thickness Quality setting, standing upright with no Supports but Brim turned on.

It took me 29 hours to print the three Board Singlematerial Version at once.