Spice Rack for Ankerkraut Spicemixes (stackable) MM
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
It's a Remix of Frank Deschners Spice Rack. The design was nice but i was missing something.
- Rating
- 4.75 / 5
- Likes
- 41
- Downloads
- 297
- Makes
- 4
- Views
- 1,974
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
It's a Remix of Frank Deschners Spice Rack.
The design was nice but i was missing something. So i decided to remix his design. Made it a littlebit smaller and stackable.
This Version is unlimited Stackable.
Limits only by physics.
And it got a fancy Logo ;)
Update:
Added a 2nd version of the board with a bigger Logo
Update 2:
The Multimaterial Version for the 3x Board with the logo is here.
Update 3:
Bigger is better! Now as 4 Bottles Version. You need to place the boards diagonal on the Bed (see Picture)
spicerack-4-w-logo.stl
The 4x Bottles version with the logo
spicerack-4-no-logo.stl
The 4x Bottles version without the logo
spicerack_logo_for_MM.stl:
Just the Logo-Letters. Print them in a different Color you want or paint them seperately and press them in the Board (See pictures if you don't get it) Print without Brim!
spicerack_bord_for_MM.stl:
The 3x Board with Logo for the loose printed letters
spicerack_board_with_bigger_logo.stl:
Thats the size from the logo of the 2-Board-Version on the picture.
spicerack_board_with_ankerkraut_logo.stl:
Thats the size from the logo of the 3-Board-Version on the picture.
If you want to stack more than three, please use proper wall fasteners and use more than just one Board to fasten the Rack.
To print a 3 Board Spicerack at once it took me 29 hours.
Video of first assembling:
Print instructions
It fits like a glove
If you deburr very well!
The arms and the plugs are just 0,1mm smaller then the hole. Deburr really very well!
Printed in PLA, 30% Infill, 0,4mm Nozzle, 0,2mm thickness Quality setting, standing upright with no Supports but Brim turned on.
It took me 29 hours to print the three Board Singlematerial Version at once.