1 / 8
Marshall Amp Box
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A box with a magnetic lid modeled after a Marshall amplifier. Pre-split for your printing pleasure.
- Ocena
- 5 / 5
- Polubienia
- 190
- Pobrania
- 1115
- Wydruki
- 10
- Wyświetlenia
- 6230
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (10)Wydruki i komentarze (Wydruki: 10) (Komentarze: 18)Remiksy (0)Kolekcje (217)Powiązane
Changelog:
- Nov 30 - Added pegged bottom model that should interface with the top, for non-magnetic versions. Added trim option for an accent around the grille.
- Dec 1 - Added MMU versions.
- Dec 4 - Fixed Pegged pegs not pegging. Decreased peg by 0.1mm
- Dec 15 - Fixed issue with magnetic holes being too large on all models
For your favorite rock and roll legend, a tiny Marshall Amp with space inside! Held together with eight 8x2mm magnets. This should be perfectly sized to hold a few gift cards, guitar picks, or anything else that you might consider reasonably small.
Assembly Instructions:
- Print the top and bottom in their default orientation, flipping may result in issues.
- The logo should be printed in vase mode for quality and reduced stringing
- Plate may be very tight, and require glue to remain seated.
- Magnets may or may not require glue depending on your printer's tolerance ability
- Magnetic version uses 8x2mm disc magnets.
Happy printing, rock on!