Raspberry Pi 4 Fan Mount **Backward Compatible!**
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Raspberry Pi 4, 3 Fan Mount
- Ocena
- 5 / 5
- Polubienia
- 48
- Pobrania
- 595
- Wydruki
- 4
- Wyświetlenia
- 2159
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
As many know, the Raspberry Pi 4 can struggle with high CPU temps and overheating. I've designed a simple fan mount to attach a 30mm fan to your Pi to help cool it! There are a few versions with 2 or 3 screw mounts. There are versions to accept m2 (or #2 machine screw) and m2.5 for the board-mount screws. The fan screw holes are all m3. You'll need a 3v or 5vDC 30mm fan as well. We just had the fan wired directly to 5V and GND but you can write (or find online) a script that will control fan speed based on the CPU temperature.
To connect the fan to the headers, I soldered breakaway female headers with 0.1" (2.54mm) spacing to the fan wires and plugged them in. Make sure you use the correct pins and note the polarity!
2-27-2020: Added 40mm mount, design has not been printed or tested