Mount oversize Y motor on ender 3 switchwire conversion
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allows use of the extruder motor or a beefy 48mm upgrade without fouling the bed carriage. Fits DaRk_dOg and Traino
- Ocena
- 5 / 5
- Polubienia
- 78
- Pobrania
- 356
- Wydruki
- 2
- Wyświetlenia
- 3017
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- GNU General Public License v3.0
For DaRk_dOg and Triano's mods, allows the use of a larger Y stepper motor without having clearance issues with the enclosure or the y carriage by inverting the pulley.
Includes a spacer to adapt gantry length for the shorter V2 profile, not needed for PRO models. Does not fit the original.
Pictured is a 48mm e3d high-torque motor fitting easily in the same space as the original motor. I recommend at least using the extruder motor and having some Y over-travel so all of the bed can be covered with a mesh. This is slightly more fiddly and requires smaller SHCS not BHCS screws, but I've been using it for months on VS.373 successfully.
This might also work with a stock ender 3 if you print a mirror image and move the endstop.
Find more switchwire conversion mods