Pokeball Case for Mi True Wireless Earphones 2 Basic
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a pokeball like cover for the Mi's earphones. Has to be glued in place.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 62
- Wydruki
- 0
- Wyświetlenia
- 1093
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
Easy to print pokeball case. Print at 0.2 layer height and use 3 perimetres for extra strength.
Traditionally, the top cover should be red, the base white with a colour change to black, the bigger circle black and the smaller one white. Personally, I liked the colour ratios when the top 5 mm of the base are black but you can play around in tinkercad and find out what you prefer.
Unfortunately, due to the curvature of the case itself, the top cover cannot be friction fitted so it must be glued instead (I used simple instant glue). As a result, I also glued the base but someone can tweak the tolerances on the step files if they want to try to have a friction fit.