Napa 23003 Transferflow Trax II Filter Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fuel Filter mount retrofit for an Older Trax 2 Transferflow tank, used with a Herko RV002 pump.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 259
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
Designed to print in TPU (I used Overture 95A Red).
Fuel Filter mount for an Older Trax 2 Transferflow tank, did not originally come with a filter but was added due to the stock pump failing and the newer systems using filters. If you use this to add a filter your original protective cover will no longer fit.
My old Fuel Pump died so I had to replace it with a Herko RV002, apart from splicing connectors I needed the following to restore my system:
- 3/8 Fuel Hose (between filter & pump)
- Stainless Steel 1/8" NPT threaded ¼" Hose Barb for pump
- 2x Stainless Steel Hose Barb Reducer 3/8" to ¼": one for the pump-to-filter, another for the pump-to-tank as the embedded connector for the RV002 is ¼".
- Short lengths of ¼" fuel hose to clamp the barb reducers into to step up hose sizes.
- Hose clamps
- The original nuts for the studs to mount.
Flow is great, the pump will kick on and move a few gallons in maybe a minute, when my pump was failing it would turn on and stay on for about 10 minutes and do that a few times before giving a NOFLOW code.