Napa 23003 Transferflow Trax II Filter Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fuel Filter mount retrofit for an Older Trax 2 Transferflow tank, used with a Herko RV002 pump.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 22
- Makes
- 0
- Views
- 260
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Public Domain
Designed to print in TPU (I used Overture 95A Red).
Fuel Filter mount for an Older Trax 2 Transferflow tank, did not originally come with a filter but was added due to the stock pump failing and the newer systems using filters. If you use this to add a filter your original protective cover will no longer fit.
My old Fuel Pump died so I had to replace it with a Herko RV002, apart from splicing connectors I needed the following to restore my system:
- 3/8 Fuel Hose (between filter & pump)
- Stainless Steel 1/8" NPT threaded ¼" Hose Barb for pump
- 2x Stainless Steel Hose Barb Reducer 3/8" to ¼": one for the pump-to-filter, another for the pump-to-tank as the embedded connector for the RV002 is ¼".
- Short lengths of ¼" fuel hose to clamp the barb reducers into to step up hose sizes.
- Hose clamps
- The original nuts for the studs to mount.
Flow is great, the pump will kick on and move a few gallons in maybe a minute, when my pump was failing it would turn on and stay on for about 10 minutes and do that a few times before giving a NOFLOW code.