One Punch Man - Saitama Mini Dude
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Thanks to Wekster who inspired in making this mini dudes based on his design.
- Ocena
- 5 / 5
- Polubienia
- 27
- Pobrania
- 277
- Wydruki
- 1
- Wyświetlenia
- 1980
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial
Thanks to Wekster who inspired in making this mini dudes based on his design.
This is Saitama aka Caped Baldy aka One Punch Man
Here to be your hero for fun
Support me on Patreon:
Print instructions
If you are making your own gcode you only need supports between the legs. The one pictured was printed that way.
The included gcode has the needed supports
Also an FYI
The included gcode will heat the nozzle to 130 degrees before doing the bed mesh, then wait a bit for the pinda probe to normalize its temp
After the bed mesh is done it will heat up the nozzle to 215 for the first layer.