REV Robotics Spark MAX Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bolt-on mount for REV Robotics Spark MAX motor controllers.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 124
- Wydruki
- 0
- Wyświetlenia
- 906
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a bolt-on mount for REV Robotics Spark MAX motor controllers. This version accepts #8 bolts to mount to any flat surface. The motor controller is secured using clips that securely hold the motor controller to the base.
You will need to print 2 clips for each mount. I print the clips using PLA due to its excellent elastic properties, but please feel free to try other materials and post your experiences in the comments!
I recommend printing the base part out of PETG or a similar material with good layer adhesion. PLA does not hold up during the rigours of competition.
UPDATES 2024-01-12:
- Uploaded a new version of the clip which introduces even tighter spring force onto the base.
- Corrected part orientations.