1 / 2
Alternative Door For YZ Einsy Case — zdjęcie 1
1 / 2

Alternative Door For YZ Einsy Case

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

An alternative design for the YZ Einsy Case from Carter which I designed for my Prusa Bulletproof wide body kit.

Ocena
0 / 5
Polubienia
36
Pobrania
127
Wydruki
2
Wyświetlenia
1793
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

An alternative design for the YZ Einsy Case from Carter which I designed for the Prusa wide body kit.

This upload contains only the modified doors. All other parts must be downloaded in the linked original.

I attached the inner grille to the doors with a 3D printing pen. You can also just glue it in place. Pay attention to the alignment of the grille and rotate it so that it sits optimally over the holes.
I also recommend printing the X-Motor cable protection included in the files. This one is a remix of argoroots model, I made the side thinner so it won't rub on the Einsycase.

Thanks to Carter for the Einsycase, this is one of those modifications which are so good that they should be standard.

 

I created this design especially for the Bulletproof Wide Body for the Prusa MK3 series, maybe this is something for you!

Tagi