Miata Swaybar Reinforcement Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Similar to Racing Beat's swaybar blocks, but print them cheap and self source fasteners.
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 185
- Wydruki
- 1
- Wyświetlenia
- 1672
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Printable Miata swaybar blocks. If someone can confirm fitment, I printed these 2-3 years ago and people have been asking so I dug the files up but not 100% positive they're the last iteration or on fastener sizes.
Test fitted to ‘99 without power steering, should fit 90-05 w/o ps and 96-05 with ps if I read Racing Beat’s manual correctly.
Make them for yourself, give them to friends, I don't want to see them popping up from Joe Schmoe's ender 3 on various Miata BST pages like other printable Miata stuff does. If people are interested, I'm happy to print and sell them in an appropriate material for those who can't.
Print:
2x blocks
- Use a temperature tolerant and creep resistant material. My first were PETG, they deformed a little but still worked. I use PCPBT now and they've been good for a couple years in a race car's engine bay.
- Print 100% walls no infill for best strength.
Fasteners:
- 2x M8-1.25 bolts (40mm?? if someone can confirm)
- flange head preferred
- 2x M8-1.25 nuts
- flange head preferred
- 2-4x M8 washers (only needed where flange head fasteners aren't used)
Installation: Basically follow the Racing Beat guide…