1 / 9
LED profile holder to 45° (For Mikro 2 15*7mm profile)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple LED profile (Mikro-2) holder that turns your normal profile to angled one.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 84
- Wydruki
- 0
- Wyświetlenia
- 553
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (17)Powiązane
No special print instructions, just use material that is appropriate for your use case. I made 2 versions - one for double sided tape only and one with screwhole - you will need at least one side that is passthrough to be able to mount it, so there is file with either side to choose from. (3mm (wood) screw with approximately 6mm countersunk head). The profile type is Mikro 2 (+-15*7mm).