1 / 1
GMT800 Cassette Player Hole Storage Cubby
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
For installation:
Remove your old cassette player and housing
- undo the two screws holding the cassette player to the mount/housing
- Install the printed part into the housing (should be a snug fit), make sure the lip on the opening is on the bottom
- Verify fitment before continuing
- Use a few dabs of super glue or epoxy or similar to hold the printed part to the housing so it doesn't come loose from vibrations or someone pushing on it or something
Dimensions of the cubby STL:
- 81.5MM deep
- Opening 141.5MM wide
- Opening 33.5mm tall
Included is the STEP file if you want to make modifications to the design