Rockdeer (The Rock + Reindeer) - No Supports
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just a fun mashup I slung together!
- Ocena
- 0 / 5
- Polubienia
- 36
- Pobrania
- 128
- Wydruki
- 0
- Wyświetlenia
- 911
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Remixed from:
https://www.prusaprinters.org/prints/32751-dr-smolder-bravestone-dwayne-johnson &
https://www.thingiverse.com/thing:1203313
The antlers are already really difficult to print, so scale down at your own risk!
If you would like to support my work or have access to ALL of my files you can consider joining my Patreon: https://www.patreon.com/thinair3D
FDM or Resin: FDM or resin
Scaling: Current Size: 145 x 98 x 175. The antlers are already small so scale down at your own risk!
Supports: None!
Nozzle Size I Used: 0.4
Infill/Perimeters: 15% with 2 perimeters
Layer Height: I used 0.20, but any layer height should be fine.