Rockdeer (The Rock + Reindeer) - No Supports
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Just a fun mashup I slung together!
- Rating
- 0 / 5
- Likes
- 36
- Downloads
- 128
- Makes
- 0
- Views
- 911
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Remixed from:
https://www.prusaprinters.org/prints/32751-dr-smolder-bravestone-dwayne-johnson &
https://www.thingiverse.com/thing:1203313
The antlers are already really difficult to print, so scale down at your own risk!
If you would like to support my work or have access to ALL of my files you can consider joining my Patreon: https://www.patreon.com/thinair3D
FDM or Resin: FDM or resin
Scaling: Current Size: 145 x 98 x 175. The antlers are already small so scale down at your own risk!
Supports: None!
Nozzle Size I Used: 0.4
Infill/Perimeters: 15% with 2 perimeters
Layer Height: I used 0.20, but any layer height should be fine.