NonOilen Reuse me Cup
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Coffee/tea mug printed from NonOilen®
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 106
- Wydruki
- 3
- Wyświetlenia
- 654
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
Provided are two .3mf models:
1. Original
As published on Thingiverse by Fillamentum.
This is a coffee/tea mug which we use by ourselves in the office, printed from NonOilen®
More info about this project: https://fillamentum.com/blogs/the-use-of-nonoilen-filament-in-fillamentum-office
About NonOilen®: http://www.fillamentumnonoilen.com
Print Settings:
4 perimeters
10 top/bottom layers
0.15 mm layer height
20% infill
2. Ristretto
It is scaled down to 65% with a double surface insulation wall thanks to the small number of perimeters and sparse infill. It saves about 80g of material and almost 10 hours of print time (and it is smaller and a bit less sturdy).
Print Settings:
65% scale factor
2 perimeters
8 bottom layers
5 top layers
0.15 mm layer height
5% infill