NonOilen Reuse me Cup
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Coffee/tea mug printed from NonOilen®
- Rating
- 5 / 5
- Likes
- 13
- Downloads
- 106
- Makes
- 3
- Views
- 654
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
Provided are two .3mf models:
1. Original
As published on Thingiverse by Fillamentum.
This is a coffee/tea mug which we use by ourselves in the office, printed from NonOilen®
More info about this project: https://fillamentum.com/blogs/the-use-of-nonoilen-filament-in-fillamentum-office
About NonOilen®: http://www.fillamentumnonoilen.com
Print Settings:
4 perimeters
10 top/bottom layers
0.15 mm layer height
20% infill
2. Ristretto
It is scaled down to 65% with a double surface insulation wall thanks to the small number of perimeters and sparse infill. It saves about 80g of material and almost 10 hours of print time (and it is smaller and a bit less sturdy).
Print Settings:
65% scale factor
2 perimeters
8 bottom layers
5 top layers
0.15 mm layer height
5% infill