1 / 6
Dayton KAB-60M Case
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple and compact case for Dayton KAB-60M amplifier that allows for access to all connections. I created this with…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 209
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial
Simple and compact case for Dayton KAB-60M amplifier that allows for access to all connections. I created this with the intention of being placed in a larger enclosure with no special mounting considerations. If your use case differs, let me know and I'll see if I can create alternate pieces to accommodate the need.
Instructions:
- must use supports when printing bottom (for countersunk socket head screw holes)
- place top down when printing top (no supports needed)
- place board in bottom piece (should be moderately tight-fitting) and observe that it is flush with the edges of the bottom case
- affix top and bottom pieces with M3x10 socket head screws (I used these because that's what I had available, but anywhere between M3x5 - M3x10 would be sufficient)
- top and bottom pieces should be gapless where they meet
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
.2mm
Infill:
= 20%Filament: Overture PETG Black
Category: Audio