1 / 6
Dayton KAB-60M Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple and compact case for Dayton KAB-60M amplifier that allows for access to all connections. I created this with…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 15
- Makes
- 0
- Views
- 209
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial
Simple and compact case for Dayton KAB-60M amplifier that allows for access to all connections. I created this with the intention of being placed in a larger enclosure with no special mounting considerations. If your use case differs, let me know and I'll see if I can create alternate pieces to accommodate the need.
Instructions:
- must use supports when printing bottom (for countersunk socket head screw holes)
- place top down when printing top (no supports needed)
- place board in bottom piece (should be moderately tight-fitting) and observe that it is flush with the edges of the bottom case
- affix top and bottom pieces with M3x10 socket head screws (I used these because that's what I had available, but anywhere between M3x5 - M3x10 would be sufficient)
- top and bottom pieces should be gapless where they meet
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
.2mm
Infill:
= 20%Filament: Overture PETG Black
Category: Audio