Voron Anything Handles
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Voron Handle Upgrade
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 47
- Wydruki
- 3
- Wyświetlenia
- 1196
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v2.0
Created some handles for my Trident since I don't like the way the stock ones come. I recommend the low profile (labeled as "_LP") ones as they are less bulky, and I prefer them personally. Magnets should be able to slide and stay in without glue, but it doesn't hurt to add some. May also be worth installing weaker magnets to where the stock ones are to make it opening and closing the doors smoother, but honestly works fine with the stock ones.
BOM:
Printed Parts x1 (Of each)
6x3 Magnets x4
VHB Tape
Install:
- Apply VHB tape to the back of both handles
- Attach one side of the handles to where you want them to be and flush to the acrylic panel
- Attach the other side with the magnets to ensure the logo lines up properly and verify
- Press down and secure handles to the panels
- Complete
If you have any questions or have any recommendations for improve don't hesitate to reach out. Thank you y'all!