Cute Christmas tree with shoes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A scalable Christmas tree with shoes and a cute face because everything is better with some feet
- Ocena
- 4,951 / 5
- Polubienia
- 2253
- Pobrania
- 8745
- Wydruki
- 199
- Wyświetlenia
- 29 075
- Oceny
- 163
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a scalable Christmas tree with shoes because everything is better with some shoes and a face XD. The first tree is at scale 75% the middle is at 100% and the right one is at 50%. You can go bigger if you want.
note that the smaller you go the harder it is to get the shoes in. At the scale of 50% you have to push a bit harder than the one on 100%.
3D PRINTING:
You can print this with a layer height of 0.2 (for the 50% tree and the shoes) or 0.3mm. You don’t need supports.
I would recommend dropping the shoes 1mm lower in the slicer as the shoes are a bit too round in the front. I printed them with 15-20% infill (trees and shoes).
If you read this in December, Happy Christmas!
I borrowed the shoes from @FatherLicorice and his cute little ghosts.